Table of Contents

Section #

Content

3.

3.1

3.2

3.3

3.4

3.5

3.6

3.7

Rental Products & Promotions

Inventory

Add-ons

Unavailable Dates

Special Price

Duration Discounts

Link Rental Addons

Link Verification Fields

 

3.     Rental Products& Promotions

3.1    Inventory

ERN Rentals provides a catalog-based system. The products that the admin adds are known as Marketplace Products. A seller can use these products to set up their shop at the front-end. A seller can also add their catalogs which are displayed on the Seller Products page.

NB: The admin can restrict the seller from adding any new products. If it is so, the seller will only be able to view the products added by the admin for which they can add inventories.

Important Terminologies: The seller needs to understand a few terminologies before proceeding further with adding products. Understanding these terms will make it easy for the seller to navigate the Products section.

Depending upon who added them to the system, the products available on the website can be categorized among two categories:

i.     Marketplace Products: These are the products added by the admin. The sellers can view and add inventories for these products but cannot make any changes to their basic attributes.

ii.     My Products: These products are added by the seller itself. The products added by a seller will only be shown on that sellers panel and only they can make changes to them.

Seller Shipping: The admin can allow/restrict shipping for the sellers. If the admin allows, the seller can enable/disable the shipping option for any product added to the system. The seller can also ship the products added by the admin (Marketplace Products) by enabling the toggle button provided under the Seller Shipping column. However, please make sure to add inventory for those products. The shipping options seen by any seller are:

●     N/A: This option is available for products that do not require any shipping. All digital products do not require any shipping. So, if a digital product is added by the admin or by the seller, it will display ‘n/a’ under the ‘seller shipping’ column.

●     Seller Shipping Deactivated: The grey toggle switch button displayed ahead of any product depicts that the product will not be shipped by the seller.

●     Seller Shipping Activated: The green toggle switch button displayed to the right of any product depicts that the shipping for that product has been activated by the seller. The Edit Shipping icon is displayed to the right of products for which the seller has activated shipping.

 

Shop Inventory Page

The ‘My Inventory’ listing displays the products that have inventory in the seller's shop. Sellers can search for an inventory by entering keywords in the search bar provided at the top of this page. A newly registered seller’s inventory will be empty. The seller can add inventory from ‘Marketplace Products’ or they can also add their products to the shop (Add New Product) and then add inventories (if enabled by the admin).

 

The process to add an Inventory:

 A.     Through Marketplace Products or Admin’s Catalog: From the listing area, click on the ‘Marketplace Products’ button provided in the top-right corner. The ‘Add To Store’  button is kept at the end of each listed product. To add, click on the button and an inventory setup form will open where information is added under the following tabs:

a.       Rent: Add the following information prompted:

 
 
●     Title*: Name of the inventory.

     URL Keyword: The site URL of the inventory.

     Publish: This drop-down list has two options: Yes and No. Selecting Yes’ will display this inventory at the front-end. Selecting ‘No’ will hide this inventory from the front-end.

     Available From: Select the inventory availability date. Availability of product with future date can be done and it will be visible from that date onwards.

●     Product Condition*: Select if the inventory is ‘New’, ‘Used’, or ‘Refurbished’. By selecting ‘New’ the seller confirms that the inventory will directly go from the manufacturer to the buyer and has its complete warranty. By selecting ‘Used’ the seller confirms that the inventory was used for a certain period and then sold by another buyer. By selecting ‘Refurbished’ the seller confirms that the inventory was returned by a buyer shortly after the sale due to certain reasons (mostly due to the presence of any kinds of defects) and is now available for sale with a new warranty and better quality.

●     Rental Duration Type: Select the duration type for rental. It can be in days, weeks, or months. Shipped and pick up, pick up only, and shipped only are the various options available to select. Please note, duration discount may be affected after duration type change

     Minimum Rental Duration: Set the minimum duration to rent.

     Fulfillment Method: Select the fulfillment delivery method for the product. Shipped and Pickup, Pickup Only, and Shipped Only are the various methods to choose from

●     Shipping ProfileDefine a shipping profile. Profile is seller created an entirely manageable from Shipping & Fulfillment > Shipping Profiles. Please note that the profile will update all Inventories of the same catalog for sale and rent.

     Minimum Rental Quantity*: Set the minimum quantity of the product that ought to be bought by the buyer.

     Enable Request for Quote: Enable this checkbox. Request for a quote can be enabled on the product if you would like to receive custom requirements regarding quantity and price from the buyers.

     Variant/option: Select the variant options from the list.

     Security Amount: Enter the security amount.

     Buffer Days: Set a buffer time. This is the time required to prepare your service for the next rental booking.

     Original Price: Enter the original price.

●     Rental Price(Including Tax): Enter the price inclusive of taxes.

     Quantity: Set the quantity of the product.

 Click on the Add button  and new fields to add option variants will appear below to add more option variants. Alongside this, a copy to the clipboard button  can be used to copy the information into the columns including security amount, buffer days, original price, rental price, and quantity. To paste the copied information use the keyboard shortcut (Ctrl+V) or right-mouse-click the ‘Paste’ option.

●     Add Extra Comment For Buyer: Additional comments for buyers can be added.

●     Rental Terms & Conditions: Include important rental terms & conditions.

●     Translate To Other LanguagesA checkbox to translate to other languages is provided to update data in other languages with a click. Below this, inventory data for other enabled languages are displayed. Click on the arrow icon and information is added to the title, any extra comment for buyer and rental terms & conditions fields. To save the information added, click on the ‘Save Changes’ button, whereas ‘Discard’ will abandon the changes.d 

b.    Sale: Add the following information prompted:

●     System Should Subtract Stock On Purchase: Enable this checkbox and the system will automatically subtract stock on purchase.

     System Should Track Product Inventory: Enable this checkbox to track product inventory. This setting only works when the system subtracts the stock setting option is enabled.

     Alert Stock Level: Define when the stock level alerts are raised.

     Minimum Purchase Quantity: Enter the value defining the minimum purchase quantity of the product available for sale.

     Publish: To publish the product at the front

     -+--end directly select yes, otherwise select no.

     Date Available: Define when the product inventory will be available.

     Product Condition*: Select if the inventory is ‘New’, ‘Used’, or ‘Refurbished’. By selecting New the seller confirms that the inventory will directly go from the manufacturer to the buyer and has its complete warranty. By selecting Used the seller confirms that the inventory was used for a certain period and then sold by another buyer. By selecting Refurbished the seller confirms that the inventory was returned by a buyer shortly after the sale due to certain reasons (mostly due to the presence of any kinds of defects) and is now available for sale with a new warranty and better quality.

     Use Shop Return And Cancellation Policy: Enable the checkbox to imply shop return and cancellation policy on the product setting up for sale.

B.     By Adding A New Seller Product: Click on the ‘Add New Product button provided in the center-right corner and fill in all the details. The newly added product will be displayed on the ‘My Products’ page. Click on the ‘Add Inventory’ button redirects the seller to the ‘Custom Product Setup’ page where the following product-related information is added:

 
●    Product Identifier*: Enter a unique identifier for the product. The product identifier is not displayed on the front-end and is used only for the system's internal purpose.

    Brand: Enter the brand for the product. The suggestions drop-downlist will be displayed when the seller begins to enter the brand name. However, the suggestions seen are only those that have been added by the admin. If any particular brand is not available in the suggestion list, the seller can perform any one of the following two actions as per the settings made by the admin:

  • Add Brand: This button will be displayed when the admin has disabled request approval settings from their end. The seller can directly add a new brand through this button. Once the brand is added, it will be displayed in the suggestions list.
  • Request For Brand: This button will only be displayed if the admin has enabled request approval settings from their end. The seller can forward a request to the admin to add the new brand. However, this new brand can only be linked with a product after the admin approves it. The seller can view the status of their request or make changes to it from the ‘Requests’ provided in the side navigation bar. Clicking on any of these buttons, a pop-up menu bar will appear that has three sub-tabs:

     Basic: Enter a unique brand identifier information. After adding the brand identifier, please click on the Save Changes button.

■    Language Data: The next segment of the form collects the following information:

 

➢   Language: The system allows users to add separate content for different languages. So, please choose the language type for which the information is being added.

➢  Brand Name: Enter the name of the brand. The seller can select the checkbox of Update Other Languages Data to enable the automatic translation of data to other languages.

NB: The ‘Update Other Languages Data’ option is only available if the admin has enabled the ‘Translate to Other Languages’ button. To save the added information, please don’t forget to click on the ‘Update’ button.

■      Media: Here, the seller can upload an image to represent the brand. The system allows users to add different media files for different languages. So, please choose the language type for which the media file is being added. The ‘Ratio column of the form allows you to define the dimension for the image. The seller can select any one of the ratios as per their requirement for Preferred Dimensions. To upload an image, the seller must click on Choose File. After selecting the image, a pop-up will be displayed to edit/crop the image. Clicking on Crop will save the image successfully.

 

The ‘Brand Setup Successfully’ message is displayed which confirms that either the brand has been added or the seller's request to add it has been forwarded to the admin for approval.

     Category*: Select the appropriate category in which the product can be added. A suggestions drop-down list will be displayed when the seller begins to enter the category name. The seller can choose an appropriate category from this list. However, the suggestions seen are only those that have been added by the admin. If any particular category is not available in the suggestion list, the seller can perform any one of the following two actions as per the settings made by the admin:

  

   Add Category: This button will only be displayed if the admin has disabled request approval settings from their end. The seller can directly add a new category through this button. Once it is added, the category will be displayed in the suggestions list.

   Request For Category: This button will only be displayed if the admin has enabled request approval settings from their end. The seller can forward a request to the admin to add the new category. However, this new category will only be displayed in the suggestions list after the admin approves it. The seller can view the status of their request or make changes to it from the Requests module provided in the side navigation bar.

To request a category click on the ‘Request For Category’ button. The first thing to enter is‘Category Name*’ and choose the ‘Parent Category’ from the drop-down list. Enable the checkbox ‘Translate To Other Languages’ to update data in other enabled languages. Click on the ’Save Changes’ to save the information added. This category will be displayed in the list only after the admin has approved the seller’s request.

●     Tax Category(Sale)*: Select the relevant tax category that your product belongs to for sale. The list is admin-manageable. Click on the Tax Categories link provided above the field to view the existing categories.

     Tax Category(Rent)*: Select the relevant tax category that your product belongs to for rental. The list is admin-manageable. Click on the Tax Categories link provided above the field to view the existing categories.

     Minimum selling price [Default Currency]: Enter the minimum selling price for the product.

     Status: Select the current status of this product from the drop-down list.

     Product Name*: Enter the product name that will be displayed at the front-end.

     YouTube Video URL: The seller can add a YouTube video URL for the customers to have additional knowledge about this product.

     Description: The seller can add additional information describing the product in the Description text box provided. This information can help customers know more about the product.

     ‘Translate to Other Languages’ Check-box: Selecting this checkbox, the system will automatically update content to other languages.

NB: The ‘Translate to Other Languages’ button is only displayed if enabled by the admin. If the admin has disabled this feature, the seller will have to add all the details manually in secondary languages.

●     ‘Secondary’ Language Data: The seller can manually enter all the details in a secondary language.

To save the product information added, kindly click on the Save and Next’ and you will be introduced to the next part of the form. If the seller wants to cancel adding this product, they can click on the Discard button which will redirect them back to the Shop Inventory page.

ii.    Attribute & Specifications -

This tab helps sellers add the attributes and specifications that define the product. The seller adds the following information:

●      Model*:  Enter the product’s model name or number.

●      Product Warranty*: Enter the warranty of the product in ‘Number of Days’.

●      Mark This Product As Featured: Select the checkbox to display this product in the ‘Featured Product’ list on the homepage at the front-end. The seller can add specifications related to this product for example, when adding a ‘Phone’ to their shop, the seller can add memory space, camera resolution, and display as its specifications. To add specifications for the product, three input fields are provided which are:

●      Specification Label Text*: Enter a particular label text name in this input field.

●      Specification Value*: Enter the value of that specification.

●      Specification Group: Add a specification group.

Click on the ‘Add’ button and the added specification field will be shown on the listing below. The seller can add multiple specifications. Two action buttons are provided on the right-hand side of each specification which are:

●      Edit Clicking on this icon the seller can make changes in the previously added specification.

●      Delete Clicking on this icon will delete the specification from this list.

(Secondary) Language Specification helps sellers add details in the secondary language manually. The seller must then click on the ‘Save and Next’ button to proceed to the next tab. To make changes in previous sections, sellers must click on the ‘Back’ button.


iii.    Options and Tags -

The product being added can have multiple options such as it might be available in different sizes or colors. Such options can be mentioned in the given form. The options are also known as variants and the product inventory is added based on these options. To clearly understand how the product variants and their inventory can be added, an example is provided below.

Example: Product A is available in three different colors that are gold, pink and red. Here, ‘Color’ is the option/variant of product A. This option can be linked with Product A through this ‘Options and Tags’ tab. Now, once the seller reaches the ‘Seller Inventory’ tab, they can add inventory related to Product A using these three color variants.

●      Add Associated Product option Groups: The seller can add product options that might vary in terms of size, color, and models. The admin can link products with relevant option groups from this tab. The option groups are created from the Product Options module. This is an auto-complete drop-down bar so, that when the seller starts typing, the list of options groups added by the admin is displayed. Selecting an option group will display its names in the section provided below. On clicking the option group its variants will be displayed to the right. The added options can be deleted by clicking on the ‘Cross’ icon displayed beside each option.

●      Product Tags: The product tags are useful in displaying products in search results made by customers. The tags help sellers promote their products by displaying them as suggestions to customers who are searching for similar products. So, the seller must assign easy, relevant, and commonly used tags for the product in this input field. To enter the product tags, the seller must enter the keywords and then press ‘Enter’. The added tags can be deleted by clicking on the ‘Cross’ icon displayed beside each tag. To proceed further, the seller must click on the ‘Save and Next’ button. To make changes in previous sections, sellers must click on the ‘Back’ button.

 

 iv.    Shipping Information -

The following shipping-related information is added:

●      Shipping Profile*: Select the shipping profile from the drop-down list. The shipping profiles are created from the ‘Shipping Profiles’ module. A newly registered seller might not be able to view any shipping profiles.

●      Enable Cash On Delivery: Select the checkbox to enable the Cash On Delivery option for the product.

If the admin has restricted sellers from shipping orders, the sellers will be displayed fewer input fields- 

If the admin has restricted sellers from linking shipping packages, the sellers will be displayed fewer input fields.


If the admin has restricted sellers from shipping orders and linking shipping packages, the sellers will be displayed fewer input fields.

Click on the ‘Save and Next’ button to proceed further to the next tab.

 

 v.    Custom Fields -

Custom fields are meant to add information that help buyers fetch the collection and other specifications of the product. Please note that the custom fields are linked with the ‘Categories’ that are added and managed by your system admin. For some products, the ‘Custom Fields’ tab cannot be viewed meaning the category that you have selected does not have custom fields linked to it.


vi.    Media -

This tab has the following information to be added for the following displayed products:

●      Image File Type: Select an option from the drop-down list. This displays ‘For All Options’ by default. This means that the images added will be displayed for all the product options. The drop-down list will show the options set up for the product in the ‘Add Associated Product option Groups’ field that is provided in the ‘Options and Tags’ tab. So, the seller can add a different image for each product option.

●      Language: The system allows users to add separate content for different languages. So, please choose the language type for which the information is being added.

●      Photo(s): Add images for the product and its options by clicking on the ‘Choose File’ button. Please Keep Image Dimensions Greater Than 740 X 555.

●      File Specification Details: This section allows you to add product-related specifications that you wish to display along with the product images. This header has the following information to be added:
 
○      File Title: Add the title of the file relevant to specification details.
○      Choose File: Click on the ‘Choose FIle’ button, attach a file and follow the prompts.
○      Translate To Other Languages: Click on the checkbox before the field and the information will be updated in other enabled languages.

●      Add Specification: To add multiple specifications that you want to show along with product images, click on the ‘Add Specifications’ button. Once information is added, click on the ‘Save And Next’ button. The added product will be displayed on the ‘Seller Products’ page and its inventories will be displayed on the ‘Seller Inventory ‘ page.

 

vii.     Inventory -

The Seller can add product inventory through this tab. Here, it is important to know that the information accumulated on the ‘Inventory’ Tab belongs to the ‘Rental’ products only. Also, the inventory-related information is collected during the first time setting up of the ‘New Product Setup’ stage. If the product is saved without adding inventory then later additions can be done from the listing area ‘Edit’ button. Please note that the product inventory is added based on the options/variants defined in the ‘Options and Tags’ tab.

NB: The seller will not be able to add inventory for the products that are still ‘Un-Approved’ (if the admin has enabled such a setting).

This tab has the following information to enter :

●      Title*: Update or continue with the existing heading for the product.

●      URL Keyword*: Add the keyword URL in this input field.

●      Publish:  Select ‘Yes’ if you would like to publish your product, ‘No’ will save the product details but will hide the product from being published

●      Available From*: The seller must select the date from which the current inventory can be available. By default, it is selected for the due date. However, if the seller chooses a date in the future, the product will only be visible on the homepage from that date onwards.

●     Product Condition*: The seller can mention if the product is ‘New’, ‘Used’, or ‘Refurbished’ by selecting any one of these options from the drop-down list. By selecting ‘New’ the seller confirms that the product will directly go from the manufacturer to the customer and has its complete warranty. By selecting ‘Used’ the seller confirms that the product was used for a specific period and then sold by another customer. By selecting ‘Refurbished’ the seller confirms that the product was returned by a customer shortly after the sale due to specific reasons (mostly due to the presence of any defects) and is now available for purchase with a new warranty and better quality.

●      Rental Duration Type: Select ‘the duration type as days, weeks, or months. Note that duration discount may be affected after duration type change.

●      Minimum Rental Duration: Enter the minimum rental duration available with the product.

●      Fulfillment Method: Select the fulfillment methods from the dropdown list as Shipped & Pickup, Pickup Only, Shipped only.

●      Shipping Profile: Select shipping profile from the dropdown and it will update all inventories of same the catalog for sale and rent.

●      Minimum Rental Quantity: Enter the minimum rental quantity of the product.

●      Enable Request For Quote: Request for a quote can be enabled on a  product if you would like to receive custom requirements regarding quantity and price from the buyers.

●      Security Amount: Add a security amount of the product.

●      Buffer Days: Add a buffer time between rental bookings. This is the time required to prepare your service before the next rental booking.

●      Original Price: Add the original price of the product.

●      Rental Price: Add the rental price of the product.

●      Quantity: Add the total quantity of the rental product.

●      Any Extra Comment For Buyers: Add comments for your buyers where additional information related to the product can be added.

●      Rental Terms & Conditions: Enter rental terms and conditions.

●      Translate to Other Languages: Selecting this checkbox, the system will automatically update content to other languages.

NB: This option is only visible if the admin has enabled it from their end.

Once information is added, click on the ‘Save Changes’ button, and your inventory details will be saved and displayed on the ‘My Inventory’ Page. Please note that the admin can restrict the sellers from adding new products. In such a case, the seller can only add inventory for Marketplace products. For the items listed on the ‘My Inventory’ page, the seller can perform the following actions -

●      Check-Box: At the beginning of the listing, check-boxes are placed to make multiple selections. Make a selection by clicking inside the check-box area and options ‘Activate’, ‘Deactivate’ and ‘Delete’ will appear. Just as the name implies, ‘Activate’ will enable displaying the selected products in the seller's shop at the front end, and ‘Deactivate’ will disable the selected products from being displayed in the seller's shop at the frontend. The deactivated products will also be removed from this ‘Shop Inventory’ list. To add them to inventory again, the seller must go back to the product list page and click on the ‘View Inventories’ icon available beside the respective product. Clicking on ‘Delete’ will remove the inventory from the list permanently.

●      #: This is used to count the number of listed items. By default, the list is sorted in descending order.

●      Name: The name of the product is displayed.

●      Rental Price: See the entries of rental prices done in days, weeks, and months.

●      Rental Quantity: The quantity of the offered product available to you.

●      Available From: The availability date of the product can be seen.

●      Status Using the toggle switch, the Seller can set the status from inactive to active or vice versa. The toggle displaying ‘Green’ means that the respective inventory product is currently active and ‘grey’ means that it is inactive.

NB: ‘Status on/off’ and ‘Activate & Deactivate’ buttons perform similar functions.

●      Edit The edit button navigates the seller to the ‘Inventory Setup’ page where sellers can add/update various product details for both Rent and Sale tabs.

●      Clone There is an option to clone the product. Please note that products that do not have any product variants or options available cannot be cloned. As a result, the option or icon to clone cannot be seen.

●      Delete  : The delete button will delete the product from the seller’s shop.

There are three buttons provided on the top-right corner of this page:

NB: ‘Add New Product’ and ‘My Products’ buttons will not be displayed if the admin has restricted the seller from adding new products in their shop. In such a case, only the ‘Marketplace Products’ button will be displayed on this page.

 

C.         My Products

The products added by the seller are displayed on this page. Please note that this page displays the products added at the catalog level.

There are two buttons provided on the top-right corner of this page, which are:

      Add New Product: This button will redirect the seller to the ‘Custom Product Setup’ page.

●      Back to Inventory: This button will redirect the seller back to the ‘Shop Inventories’ page.

A search bar is provided on the top of this page using which the seller can search for a particular product using ‘Keywords’ keywords/EAN/ISBN/UPC code filters. Several action buttons are provided to the right of every product displayed in the ‘Seller Products’ list. The functionalities of these action buttons are explained below:

●      Add To Store  Clicking on this icon redirects the seller to the ‘Inventory Setup’ page. The seller can add inventory for the catalog from this page for both ‘Rent’ & ‘Sale under different tabs. The added inventory will be displayed on the ‘Shop Inventory’ page.

NB: Please note that the seller will not be able to add inventory for the products that are still ‘Un-Approved’.

NB: ‘Add Inventory’ button is not displayed beside the product in two cases:

i. No variants/options have been added to the product.

ii. All the possible inventories have already been added. These inventories can be viewed by clicking on the ‘View Inventories’ button.

●      Edit  Clicking on this icon will redirect the seller back to the ‘Custom Product Setup’ page. Sellers can make necessary changes in each of the tabs and click on the ‘Save and Next’ buttons provided at the bottom of each page to update those changes.

●      Product Images  The sellers can add any additional images to be displayed beside their products and inventories on the home page. When the seller clicks on this icon, a pop-up menu bar will appear where the following information is collected:

○      Image File Type: This drop-down bar helps sellers choose among products or any specific inventory. The inventory variants/options are provided in the drop-down list and the seller must choose for which particular inventory they want to add the images. If the seller wants to add images to all options they must select ‘For All Options’.

○      Language: Select language type from the drop-down list.

○      Photo(s): Upload images by clicking on the ‘Choose File’ button. The acceptable dimensions of the image are mentioned below. Once the seller selects the image, a pop-up bar will appear in which they can edit or resize the image. Clicking on ‘Crop’ will save the image. Once the image is uploaded, a message will appear displaying ‘Image Uploaded  Successfully’. 

3.3     Unavailable Dates

Through this area, sellers can trace the unavailability of rental products on specific dates. The information collected from the listing can also be used to know how many items are in stock and how many have been rented out. A search bar is kept for easy access to the information. The following manual actions are performed by the sellers:

     Edit : Click on the edit button and an auto-populated list will appear for the selected product. Enter in the ‘Date’ & ‘Quantity’ information. Don’t forget to click on the ‘Save Changes’ button.

     Delete : The delete button will remove the product from the listing.

 

 3.4     Special Price

Sellers can offer their products to customers at special prices. Special prices can be offered depending upon the incline or decline in demand for products. To assign a special price to a particular product, the ‘Seller Products Special Price List’ page is provided.

 

 

 

To add a product with a special price, enter the following information:

●     Select Product: The seller must select the product for which they want to assign a special price. The input box provided is an auto-complete which helps sellers find and fill-in the product name easily and accurately.

●     Price Start Date: The seller must mention the date from which the special price must start being offered to customers.

●     Price End Date: The seller must mention the last date until which the special price will be offered to customers.

NB: The ‘Price Start Date’ and ‘Price End Date’ filters can also be used together to specify a period.

     Special Price: The special price to be offered must be mentioned here.

Once the seller fills in the input-fields and clicks on the ‘Save’ button, the product that is assigned a special price will start being displayed in the list provided on this page. This page provides sellers with the following functionalities:

      Search Bar: The seller can search for a particular product at a special price, from the list by entering Keywords in the Search bar provided at the top.

      Delete : This button is provided to the right of each product mentioned in the list clicking on it will delete the respective product from this list and remove the special price assigned to it.

      Check-box:  Seller can select multiple products from the list to perform collective actions. A ‘Delete’ button will appear on the top-right corner of the list when selected check-boxes click on which seller can delete the selected products from the ‘Special Price’ list.

 

3.5     Duration Discounts

This module allows sellers to add a discount for buyers who have rented an item for more than a specific duration. Above the listing, a panel is provided to add duration discounts with products:



 
      Select Product: Click on the arrow icon, to make a selection of the product from the dropdown list upon which duration discount needs to be added.

      Minimum Duration: Enter the number of months the discount is applied for.

      Percentage (%): Add a discount percentage applied to the selected product. Once the details are added, click on the Save Changes’ button. The added duration discounts added for the products can be ‘Edited’ or ‘Deleted’ from the listing area. Also for the easy sorting of the records, ‘Search’ filters are available.
 

3.6     Link Rental Addons

From this section, add-ons that preexist in the system can be linked with the products. Please note that a single add-on can be linked with multiple products. To link, access the area above the listing and enter details into the following fields:

●      Search Rental Addons: Type in the first few characters and the list of addons will auto-populate for you to select.

●      Search Product: Search the product that you want to link with the add-on.

 

Don’t forget to click on the ‘Save’ button and the add-on attached to the products will be shown in the listing area.


 

3.7     Link Verification Fields

Sellers can attach verification fields with the products added to their shops. These fields are created and managed by the admin that can be used by sellers to collect any verification-related details required from buyers. Please note that this field will only be displayed for rental products. View the existing verification fields by clicking the ‘View Verification Fields’ button. To link, access the area above the listing and enter details into the following fields:
 
 
      Search Product: Search the product that you want to link with the add-on.

      Search Verification Fields: Type the first few characters and an auto-populated verification listing will appear to select and add fields for the selected product.
 
Don’t forget to click on the ‘Save’ button and the add-on attached to the products will be shown in the listing area.


Want Equipment Rental Network Updates Sent Straight To Your Inbox?

Sign Up To Be The First To Hear About Big News.